Teltonika Energy

EVC2 22kW

Name: EVC2 22kW
Brand: Teltonika Energy
Price: 1450 AUD
Availability: InStock

A 22 kW three-phase charger with a 7.5 m tethered cable, OCPP 1.6J and installer-configured load balancing and solar modes.

Estimated charger price

around $1,450

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Teltonika Energy EVC2 EVC2002130S0 is an exact 22 kW / 32 A three-phase configuration with a fixed 7.5 m Type 2 cable and 4G connectivity. It is rated IP56/IK10 and operates from -30°C to 50°C. Connectivity includes Wi-Fi, Ethernet, Bluetooth and cellular, with local control through the Teltonika EV Charging app and NFC. Dynamic load balancing requires compatible CT clamps, Modbus RTU metering or supported network metering. Solar charging uses the configured site measurement to identify import and export and provide Solar Only, ECO and Hybrid charging modes.

Key highlights

22 kW / 32 A three-phase

Exact model EVC2002130S0

7.5 m tethered Type 2 cable

IP56 / IK10

-30°C to 50°C operating range

Wi-Fi, Ethernet, Bluetooth and 4G

OCPP 1.6J

NFC and app control

CT, Modbus RTU or network-meter load balancing

Solar Only, ECO and Hybrid solar modes

6 mA DC residual-current detection

3-year standard warranty

Best for

Three-phase homes where the EV can accept higher AC charging rates
Drivers wanting a 7.5 m tethered charging cable
Installations requiring OCPP 1.6J
Homes able to install CT or meter-based site energy measurement
Sites benefiting from Ethernet, Wi-Fi or cellular connectivity

Not ideal for

— Single-phase homes expecting 22 kW charging
— Solar households wanting solar charging without compatible site measurement and commissioning
— Installations where dynamic load management cannot be commissioned with a supported measurement method

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP56 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power22 kW

PhaseThree-phase

Cable7.5 m tethered Type 2

Weather ratingIP56 / IK10

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingDynamic load balancing and solar modes require compatible CT or meter-based site measurement

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.