Smappee

EV Wall

Name: EV Wall
Brand: Smappee
Price: 1812 AUD
Availability: InStock

This HCM record represents the discontinued Smappee EV Wall Home and should be treated as a legacy reference rather than a second current EV Wall product.

Estimated charger price

Discontinued legacy model

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The legacy Smappee EV Wall Home was available in 7.4 kW single-phase and higher-power three-phase configurations. This HCM record represents the 7.4 kW legacy configuration. The EV Wall Home family was available with an 8 m tethered Type 2 cable or Type 2 socket and was rated IP54/IK10. Its Home package included Smappee Infinity measurement hardware for grid, solar and EV measurements, enabling autonomous overload protection and solar optimisation. Smappee now states that EV Wall Home V1, V2 and V3 are discontinued and replaced by the newer EV Wall. Buyers looking for a current product should use HCM's current Smappee EV Wall listing.

Key highlights

Discontinued EV Wall Home legacy product

7.4 kW single-phase configuration represented by this HCM record

8 m tethered Type 2 or Type 2 socket options in the legacy family

IP54 / IK10

Integrated 6 mA DC + 30 mA Type A residual-current protection

External breaker up to 40 A type B or C required

Included legacy Infinity measurement hardware for grid and solar monitoring

Autonomous overload protection and solar optimisation

OCPP 1.6J

2-year original standard warranty

Best for

Existing EV Wall Home owners checking legacy specifications
Installers servicing an existing EV Wall Home installation
Users distinguishing the old EV Wall Home from the current EV Wall

Not ideal for

— Buyers looking for Smappee's current EV Wall product
— Buyers treating this legacy page as a second current Smappee model
— Buyers relying on the historical price as a current Australian retail price

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP54 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power7.4 kW

PhaseSingle-phase for this 7.4 kW legacy configuration

Cable8 m tethered Type 2 or Type 2 socket in the EV Wall Home family

Weather ratingIP54 / IK10

Warranty2 years original standard warranty

Solar supportSurplus solar

OCPPYes

Load balancingLegacy EV Wall Home used included Infinity metering for overload and solar optimisation

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.