Smappee

EV Wall

Name: EV Wall
Brand: Smappee
Price: 1600 AUD
Availability: InStock

Australian-available EVWC-family charger offering 7.4 kW single-phase or 22 kW three-phase charging, with cable and socket versions.

Estimated charger price

around $2,000

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Australian-verified Smappee EV Wall EVWC family supports 7.4 kW on single-phase or 22 kW on three-phase at up to 32 A. It is available with an 8 m tethered Type 2 cable or a Type 2 socket. The enclosure is rated IP54/IK10 and the charger supports OCPP 1.6J, with Smappee stating readiness for an update to OCPP 2.0.1. Static overload protection is available at the charger. Dynamic load balancing and solar optimisation require additional Smappee metering hardware such as the appropriate P1 module or Smart kit.

Key highlights

7.4 kW single-phase / 22 kW three-phase

32 A maximum charging current

8 m tethered Type 2 or Type 2 socket

IP54 / IK10

OCPP 1.6J

Integrated 6 mA DC monitoring and 30 mA Type A residual-current protection

External circuit breaker required according to the manufacturer installation design

Dynamic load balancing and solar optimisation require additional Smappee metering hardware

2-year standard manufacturer warranty

Best for

Homes that may use single- or three-phase charging
Drivers who need an 8 m tethered cable
Buyers who prefer a Type 2 socket instead of a fixed cable
Homes prepared to add Smappee metering hardware for solar and dynamic load management

Not ideal for

— Buyers wanting solar-surplus charging with no additional metering hardware
— Buyers seeking a lower-cost basic wallbox
— Sites where the documented -25°C to 40°C operating range is unsuitable

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP54 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power7.4 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

Cable8 m tethered Type 2 or Type 2 socket

Weather ratingIP54 / IK10

Warranty2 years

Solar supportSurplus solar

OCPPYes

Load balancingStatic protection built in; dynamic load balancing and solar optimisation require additional Smappee metering hardware

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.