ZJ Beny

BCP AC 22kW

Name: BCP AC 22kW
Brand: ZJ Beny
Price: 845 AUD
Availability: InStock

A 22 kW three-phase BENY BCP charger family with OCPP, app and dynamic load-management functions available on selected configurations rather than every BCP unit.

Estimated charger price

around $1,000

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

BENY's three-phase BCP family supports up to 22 kW / 32 A on a suitable 400 V three-phase supply. The documented fixed-cable configuration uses a 6 m Type 2 lead and is rated IP65/IK07. BENY specifies Type A plus 6 mA DC leakage protection and an operating range of -25°C to 55°C. OCPP 1.6J, Wi-Fi or Bluetooth app control and dynamic load balancing are optional functions that depend on the exact model. Dynamic load balancing requires additional BENY current-sensing and control hardware. The exact model and included smart functions should therefore be confirmed with the Australian supplier before purchase.

Key highlights

Up to 22 kW / 32 A three-phase

6 m tethered Type 2 documented cable configuration

IP65 / IK07

Type A + 6 mA DC leakage protection

OCPP 1.6J available on compatible variants

Wi-Fi and Bluetooth app functions available on compatible variants

Optional dynamic load balancing hardware

-25°C to 55°C operating range

3-year warranty

Best for

Three-phase homes needing up to 22 kW where the vehicle can accept the available AC charging rate
Buyers looking for a lower-cost three-phase charger
Installations requiring OCPP after confirming an OCPP-equipped BENY variant
Buyers able to confirm the exact model and included smart functions before purchase

Not ideal for

— Buyers expecting every BCP 22 kW unit to include the same smart functions
— Single-phase homes
— Buyers wanting dynamic load balancing without additional BENY hardware
— Buyers wanting OCPP, app or solar functions without confirming the exact supplied model

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power22 kW

PhaseThree-phase

Cable6 m tethered Type 2 for the documented cable configuration

Weather ratingIP65 / IK07

Warranty3 years

Solar supportSurplus solar

OCPPYes

Load balancingOptional; compatible BENY DLB hardware required

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.