Zaptec

Go 2

Name: Go 2
Brand: Zaptec
Price: 1799 AUD
Availability: InStock

A compact Type 2 socket charger with OCPP 1.6J, single- and three-phase operation and automatic phase switching; current Australian V2H or V2G operation is not established.

Estimated charger price

around $1,800

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Zaptec Go 2 supports up to 7.4 kW / 32 A single-phase or 22 kW / 32 A three-phase charging on suitable supplies. It uses a Type 2 socket and is rated IP54/IK10, with a documented operating range of -30°C to 50°C. The charger includes 6 mA DC residual-current detection, while a separate Type A RCD and upstream circuit breaker are required. Wi-Fi, Bluetooth and built-in 4G provide connectivity. OCPP 1.6J is supported on appropriate firmware and can operate through cloud or native on-device implementations. Automatic one-/three-phase switching is available in a correctly configured online three-phase installation. Solar integration can be implemented through Zaptec power management, API or OCPP Smart Charging, but Zaptec's consumer Sense solar mode is not currently documented for Australia.

Key highlights

Up to 7.4 kW single-phase / 22 kW three-phase

32 A maximum charging current

Type 2 socket

239 x 178 x 73 mm

1.6 kg

IP54 / IK10

-30°C to 50°C operating range

Integrated 6 mA DC RDC-DD

External Type A RCD and circuit breaker required

Wi-Fi, Bluetooth and built-in 4G

OCPP 1.6J cloud or native on-device

Automatic one-/three-phase switching in compatible installations

ISO 15118 hardware support without confirmed active Australian V2H/V2G

5-year warranty

Best for

Single- or three-phase homes wanting a compact Type 2 socket charger
Installations requiring OCPP 1.6J
Homes able to use compatible Zaptec or external power-management integration
Buyers wanting a 5-year warranty

Not ideal for

— Buyers wanting a tethered charging cable
— Buyers expecting currently active Australian V2H or V2G operation
— Solar households expecting the Zaptec Sense in-app solar feature to be available in Australia
— Homes wanting dynamic load control without compatible monitoring or external integration

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

The manufacturer lists an IP54 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.4 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

CableType 2 socket; charging cable separate

Weather ratingIP54 / IK10

Warranty5 years

Solar supportSurplus solar

OCPP—

Load balancingRequires Zaptec power management, Zaptec Sense or compatible external control

App controlYes

V2HCapable

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.