iStore

AC EV Charger

Name: AC EV Charger
Brand: iStore
Price: 900 AUD
Availability: InStock

A 22 kW three-phase Australian-market charger with a 7 m tethered cable, OCPP 1.6, dynamic load balancing and solar charging when connected to compatible iStore equipment.

Estimated charger price

around $1,500

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The iStore IS-EVC-22000-3PH is a 22 kW, 400 V three-phase charger operating from 6 A to 32 A. It includes a 7 m tethered Type 2 cable, IP65 enclosure, Wi-Fi and Ethernet connectivity, app control and a 3-year warranty. Dynamic load balancing monitors household electricity demand and adjusts charging output around the property's available capacity. Solar charging requires a compatible iStore inverter and smart meter connected to the iStore portal with an active internet connection. The charger includes Type A plus 6 mA DC leakage detection, while the installation manual also requires appropriate external residual-current and overcurrent protection. Australian regulatory and iStore commissioning documentation support OCPP operation.

Key highlights

22 kW / 6-32 A three-phase

400 V AC supply

7 m tethered Type 2 cable

IP65 enclosure

-25°C to 55°C operating range

Wi-Fi and Ethernet

Dynamic load balancing

Solar charging with compatible iStore inverter and smart meter

OCPP operation documented in Australian commissioning material

Type A + 6 mA DC leakage detection

External residual-current and overcurrent protection required

3-year warranty

Best for

Three-phase Australian homes where the vehicle can use higher AC charging rates
Homes using compatible iStore solar equipment
Drivers who benefit from a 7 m tethered cable
Installations requiring dynamic household load management
Installations requiring OCPP 1.6

Not ideal for

— Single-phase homes expecting 22 kW charging
— Solar households without the compatible iStore inverter, smart meter, portal connection and internet required for integrated solar charging
— Buyers expecting solar integration to work with any inverter without checking compatibility

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power22 kW

PhaseThree-phase

Cable7 m tethered Type 2

Weather ratingIP65 enclosure

Warranty3 years

Solar supportSurplus solar

OCPP—

Load balancingDynamic load balancing requires correct site monitoring and commissioning

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.