Evnex

X22

Name: X22
Brand: Evnex
Price: 1699 AUD
Availability: InStock

A 22 kW-capable Evnex charger with supplied three-phase CT measurement, phase switching, solar diversion and load-management functions.

Estimated charger price

around $1,700

Estimated installation

around $700–$1,500

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

FIND MY CHARGER Back to chargers

Overview

The Evnex X22 supports 6-32 A per phase and up to 22 kW on a suitable three-phase supply. Evnex also documents phase switching that allows the charger to operate using one, two or three phases, with up to approximately 7.4 kW when operating single-phase. This HCM record represents the 5 m tethered Type 2 configuration. The charger includes three 100 A CTs for site energy measurement, supports solar-export diversion and home overload protection, and connects over Wi-Fi, cellular and Ethernet. South Australia's registered-equipment list records X22 tethered and socket variants as OCPP 1.6 three-phase equipment.

Key highlights

6-32 A per phase

Up to 7.4 kW single-phase / 22 kW three-phase

Automatic 1-/2-/3-phase switching

5 m tethered Type 2 cable

IP54 / IK08

Three 100 A CTs included

Solar-export diversion

Home overload protection and multi-charger load management

Wi-Fi, cellular and Ethernet

OCPP 1.6

RFID access control

4-year residential / 3-year commercial warranty

Best for

Three-phase homes where the EV can accept higher AC charging rates
Larger solar systems using measured excess generation
Homes or businesses needing site load management
Installations requiring OCPP 1.6, RFID or multi-charger management

Not ideal for

— Homes expecting 22 kW charging from a single-phase supply
— Sites where the supplied CT measurement cannot be installed
— Buyers wanting the smallest residential wallbox

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP54 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

PowerUp to 7.4 kW single-phase / 22 kW three-phase

PhaseSingle- or three-phase

Cable5 m tethered Type 2

Weather ratingIP54 / IK08

Warranty4 years residential

Solar supportSurplus solar

OCPPYes

Load balancingHome overload protection and solar diversion use supplied CT-based site measurement

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.