Mini Pro 3

Name: Mini Pro 3
Brand: EO

A compact 22 kW three-phase Mini Pro 3 with OCPP connectivity and CT-based solar charging and power balancing.

Confirm price with seller

Contact retailer for current pricing

FIND MY CHARGER Back to chargers

Overview

The EO Mini Pro 3 family includes separate single-phase and three-phase models rather than one universal electrical configuration. EO identifies the family as supporting up to 7.2 kW single-phase or 22 kW three-phase charging. Type 2 socket and 5 m tethered configurations are available. Current manufacturer information specifies a 230 x 151 x 125 mm enclosure, IP56 protection with an IP54 socket interface, and operation from -25°C to 50°C. The charger includes 6 mA DC leakage detection, while a dedicated 30 mA Type A RCD is required on the supply circuit. OCPP-based connectivity is supported. Solar charging and local automatic load management depend on CT measurement and the installed charger configuration. EO discontinued its original consumer app service and Mini Pro 3 users now use the ev.energy platform.

Key highlights

Separate 7.2 kW single-phase and 22 kW three-phase models

6-32 A configurable charging current

Type 2 socket or 5 m tethered Type 2

230 x 151 x 125 mm

IP56 enclosure / IP54 socket interface

-25°C to 50°C operating range

Integrated 6 mA DC leakage detection

External 30 mA Type A RCD required

OCPP connectivity

Wi-Fi, Ethernet and Bluetooth

Optional 4G on supported configurations

CT-based solar and automatic load management

ev.energy app platform

3-year warranty

Best for

Three-phase homes where the EV can accept higher AC charging rates
Solar households able to install the supplied CT measurement
Homes needing CT-based power balancing
Drivers wanting either a Type 2 socket or 5 m tethered configuration
Installations requiring OCPP-connected smart charging

Not ideal for

— Single-phase homes expecting 22 kW charging
— Solar homes where CT measurement cannot be installed
— Buyers expecting the discontinued EO consumer app
— Buyers treating the UK single-phase open-PEN feature as an Australian three-phase installation feature

Using this charger at home in Australia

This charger supports higher AC charging speeds where both your home's electrical supply and your EV's onboard AC charger allow. Confirm your home's phase support with a licensed electrician, and check your EV's maximum AC charging capability.

Where the charger and required monitoring equipment support solar-aware charging, the system can adjust EV charging in response to available solar generation. The exact behaviour depends on the charger, metering or sensors, inverter setup and configuration.

Where supported and correctly configured, load management can reduce EV charging power when other household loads increase, helping keep total demand within the configured site limit.

OCPP support allows the charger to communicate with compatible OCPP charging-management platforms. OCPP support by itself does not guarantee integration with a home battery, solar inverter, electricity tariff or every third-party platform.

The manufacturer lists an IP65 enclosure rating for this charger. The final mounting location should follow the manufacturer's installation requirements and be confirmed by the installer.

A dedicated home EV charger should be installed by a licensed electrician. The installer should confirm the circuit design, switchboard capacity, protection requirements and any applicable local electricity-network requirements.

Key specifications

Estimated installationaround $700–$1,500

Power22 kW

PhaseThree-phase for this 22 kW configuration

CableType 2 socket or 5 m tethered Type 2, depending on configuration

Weather ratingIP56 enclosure / IP54 socket interface

Warranty3 years; confirm Australian support terms

Solar supportSurplus solar

OCPPYes

Load balancingCT-based solar charging and power balancing; CT clamps supplied as standard

App controlYes

Charger prices are estimates based on publicly available pricing we could verify and may change with retailer offers, promotions and product configuration. Installation is additional.

Typical installation estimate for a straightforward home installation. Longer cable runs, switchboard upgrades, three-phase work, trenching or other site requirements can increase the cost.

Manufacturer information

Visit the manufacturer's website for current product details, warranty terms, and support.

Visit manufacturer website

Manufacturer website links are provided for reference only. Home Charger Match is independently operated and not affiliated with any charger manufacturer. Always confirm current product specifications, availability, and warranty terms with the manufacturer or seller before purchasing.